4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
Lead (Pb)
Mercury
Cadmium
Hexavalent Chromium
PBB
PBDE
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
-A
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
相关PDF资料
UPC8194K-EVAL EVAL BOARD FOR UPC8194K
UPC8195K-E1-A IC I/Q MODULATOR AGC 20-QFN
UPC8204TK-EV24 EVAL BOARD UPC8204TK 2.4GHZ
UPC8211TK-EV24 EVAL BOARD UPC8211TK 2.4GHZ
UPC8215TU-A IC AMP LOW NOISE 8-MINIMOLD
UPC8230TU-KB-E2-A IC AMPLIFIER GPS 8 PIN MINIMOLD
UPC8231TK-E2-A IC AMPLIFIER GPS 6 PIN MINIMOLD
UPC8232T5N-E2-A IC AMPLIFIER GPS 6-TSON
相关代理商/技术参数
UPC8191K-EVAL 功能描述:射频开发工具 For UPC8191K RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
UPC8194K 功能描述:调节器/解调器 USE 551-UPC8194K-A RoHS:否 制造商:Texas Instruments 封装 / 箱体:PVQFN-N24 封装:Reel
UPC8194K-A 功能描述:射频接收器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPC8194K-E1 功能描述:射频接收器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPC8194K-E1-A 功能描述:射频接收器 AGC Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:GPS Receiver 封装 / 箱体:QFN-24 工作频率:4.092 MHz 工作电源电压:3.3 V 封装:Reel
UPC8194K-EVAL 功能描述:EVAL BOARD FOR UPC8194K RoHS:否 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
UPC8195K 功能描述:调节器/解调器 TX-IF AGC + I/Q Mod RoHS:否 制造商:Texas Instruments 封装 / 箱体:PVQFN-N24 封装:Reel
UPC8195K-A 功能描述:射频发射器 TX-IF AGC + I/Q Mod RoHS:否 制造商:Micrel 类型:ASK Transmitter 封装 / 箱体:SOT-23-6 工作频率:300 MHz to 450 MHz 封装:Reel